Product Categories
Contact Us
Address:
Tonglu Factory: Xiafan Road,Tonglu Economic DeveIopment zone, Hangzhou Zhejiang China
Jiande Factory: Qintang industrial Park, Jiande County, Hangzhou City, Zhejiang Province China
Tell:0086-571-64111111
Fax: 0086-571-64112858
E-mail: longyuanfilterpress@gmail.com
Hot Tags:Filter Press Parts | Multifunctional Filter Press | Membrane Filter Press | Filter Press | Membrane Filter Plate |
News

Filter Press Faster Filtration

1 Filter Press The flow is not washable: This form has only one intermediate feed channel, the material from the thrust plate feed hole through the feed channel into the filter room, filtrate through the filter media through the liquid hole of the filter plate discharge. Filter Press It is suitable for general filtration, with the advantages of fast filtering speed and intuitive filtering effect.

2) The undercurrent is not washable: This type of pressure filter machine in addition to the feed channel, there is also a liquid channel. The filtrate of each block of filter plate is discharged together by this channel. This form is suitable for materials with pollution, poisonous, Filter Press volatile and not needing washing.

3) Clear flow can be washed: this form in addition to the feed channel, there is also into the washing fluid channel. The filtration part is not the same as the clear flow. After the filter is finished, wash the operation.

4 The undercurrent can be washed: one-way washing and undercurrent two-way cross washing. This type of press filter feeding and washing fluid with the flow can be washed, Filter Press just out of liquid way. The liquid of each piece of filter plate is discharged together with the liquid channel. This form is suitable for contaminated, poisonous, volatile, need to wash the material.

The choice of filter cloth is very important, in the process of filtration plays a very important role, filter cloth performance, directly affect the effect of filtration, in order to achieve a more ideal filtration effect and speed, according to the material size, density, viscosity, Filter Press chemical composition and filtration process conditions to choose. The user depends on the actual filtering requirements. Filter Press In the clipping filter cloth, the hole spacing, aperture size must be accurate, the aperture can not be too small, otherwise it will block the feed hole, the nylon buckle on the filter cloth should be arranged evenly, Filter Press and the filter cloth should be cut with special tools such as soldering iron, so as to avoid the filter cloth off line.

1 The hydraulic station, the electric control cabinet clean, check the hydraulic station to install the tubing is correct, the electrical control cabinet wiring is correct, and all electrical wiring is correct.

2 The rack, filter plate, wipe clean, check the filter plate arrangement is neat, correct; Check the filter cloth installation has no folding phenomenon, if there is a need to flatten.

3 Check the feeding, washing, hair and other piping and valve configuration is correct and reasonable.

1 regularly check the work of all kinds of instruments, Filter Press find out the abnormal timely maintenance or replacement.

2 in strict accordance with the matters needing attention, Filter Press daily maintenance and maintenance, pressure filter machine failure maintenance methods of the relevant contents of the operation, prohibit all kinds of instruments under abnormal conditions for filtering operation.

3 The working pressure of the cylinder is usually around 25Mpa, try to pressure the maximum pressure. 5Mpa, but it is strictly prohibited to work longer hours than 28MPA, and it is absolutely forbidden to work in the case of exceeding. 5Mpa.

1) should be prepared enough filter slurry, gas source,Filter Press  water, etc., to meet the test conditions.

2. The users who need to be tested and tested for filtering slurry shall be equipped with professional laboratory personnel and the necessary laboratory equipment and reagents.

3) is equipped with 1-2 maintenance workers, operating several workers.

4 with general tools, such as small jacks, Filter Press adjustable wrenches, hammers, wire pliers, screwdriver, pipe clamp, hexagon wrench, and a small amount of oil, lubricants, cotton yarn and other auxiliary materials for use.