Product Categories
Contact Us
Tonglu Factory: Xiafan Road,Tonglu Economic DeveIopment zone, Hangzhou Zhejiang China
Jiande Factory: Qintang industrial Park, Jiande County, Hangzhou City, Zhejiang Province China
Fax: 0086-571-64112858
Hot Tags:Filter Press Parts | Multifunctional Filter Press | Membrane Filter Press | Filter Press | Membrane Filter Plate |

Filter Press Filtering Mechanism

The filter plate has stable performance, convenient operation, safety and saving power. The metal drum is made of seamless steel tube and plastic strainer. It is high temperature, high pressure and durable.

Installation and debugging

1. The filter press should be installed on flat concrete. The foot of the feed end is fixed on the base; The support ends without the anchor bolt, or the anchor bolt is positioned with two nuts, the nut gasket is properly spaced between the holder and the foot can be retractable. Before positioning the installation personnel should correct the vertical degree of the horizontal surface of the beam and the thrust plate.

2. The structure of the foundation shall be designed by the construction engineers according to the load condition of the equipment, and the anchor bolts shall be filled twice with the reserved holes.

3. There should be sufficient operation and maintenance space around the filter press, and the hydraulic pressure filter should select the appropriate position to place the hydraulic station to ensure the hydraulic station can work properly.

4. Press the filter plate according to work requirement, and arrange the feeding, washing and drainage pipeline. Equipped with a filter pressure display table and a reflux channel that controls filter pressure. If the diaphragm is squeezed, the compressed air line is arranged.

5, hydraulic filter press, hydraulic station infuse cleaner fuel tank # 20-40 # hydraulic machine oil, using temperature > - 5 ℃; If environment temperature is low, can choose similar viscosity, low freezing point hydraulic oil. The hydraulic oil must be added by 80-100 mesh filter.

6. Mechanical or hydraulic pressure tightening device, connect the power starting motor to work correctly. Hydraulic clamping pressure gauge should be rising steadily, hydraulic system no discharge phenomenon, according to the model size correctly adjust the working pressure of the hydraulic pressure station, after commissioning if found insufficient oil storage tank should be added.

The structure of filter press is composed of three parts:


The frame is the basic part of the filter press, the ends are the thrust plate and the pressing head, and the two sides of the girder will connect the two together, the girder is used to support the filter plate, the filter box and the compression plate. In order to meet the higher health needs, the frame needs to be covered with stainless steel. The stainless steel technology can be used for reference, and its quality can meet the needs of European customers.

A and thrust plate: it is connected with the support to the end of the press filter on the foundation. The thrust plate of the air filter press is in the middle of the feed

Holes, four corners and four holes, the two corners of the hole are washing liquid or compressed gas inlet, and the next two angles are outlet (undercurrent structure or filtrate outlet).

B. Pressure plate: to press the filter box tightly, the roller on both sides is used to support the compression plate to roll in the rail of the girder.

C. Girder: it is a load-bearing component. According to the requirements of environmental corrosion protection, rigid polyvinyl chloride, polypropylene, stainless steel coating or new anticorrosive coating can be selected.

Compaction mechanism

Manual pressure, mechanical pressure, hydraulic pressure.

A, manual compaction: the press plate is pressed tightly with A screw type mechanical jack.

B, mechanical compaction: the pressure mechanism is driven by the motor (equipped with advanced overload protector), gear payment, wire rod and fixation

Nuts are made of nuts. When pressed, the motor is turning, driving the reducer and gear, so that the silk rod is rotated in the fixed silk mother, pushing the press plate and the filter press tightly. When the pressure force is more and more big, the motor load current increases, when the big to protector set current value, maximum clamping force, motor to cut off the power supply, stop running, because of the wire rod and the fixed wire mother have reliable self-locking spiral Angle, can reliably guarantee the state of compression in the process of work, to return, motor reversal, when the weight for the hold-down plate, contact to switch back to stop.

C, hydraulic pressure: the composition of hydraulic pressure actuating mechanism consists of hydraulic station, oil cylinder, piston, piston rod and piston rod and pressure plate

The structure of the hydraulic station of the havelan card is composed of: motor, oil pump, overflow valve (regulating pressure) reversing valve, pressure gauge, oil circuit and fuel tank. Hydraulic pressure mechanical compaction, the hydraulic station for the high pressure oil, oil cylinder and a piston component cavity filled with oil, when the pressure is greater than the pressure plate running friction resistance, pressure plate slow pressure filter plate, when the pressure force to achieve the relief valve set pressure value (by pressure gauge pointer display), filter plate, filter box (plate and frame type) or filter plate (van) is compact and started unloading overflow valve, at this time, to cut off the motor power, compaction action is complete, return, reversing reversing valve, pressure oil into the cylinder rod cavity, when the hydraulic pressure plate can be overcome frictional resistance, pressure plate began to return. Automatic pressure for hydraulic pressure, clamp force is controlled by the electric contact pressure gauge, the gauge of the pointer and UCLA's pointer to set the value of process requirement, when the pressure force reaches a pressure gauge highs, power cut, the oil pump to stop the power supply, oil system due to the possible leakage and leakage cause the loss of compression force, when the lower limit to the pressure gauge pointer, electricity, oil pump start fuel supply, the pressure to reach highs, power cut, oil pump fuel cut-off, such circulation filter materials in the process of guarantee in order to achieve the effect of clamping force.

Filtering mechanism

The filter mechanism consists of filter plate, filter frame, filter cloth and press diaphragm. The filter board is covered by filter cloth, and the filter plate is made up of diaphragm plate and side plate when pressing the diaphragm. The substrate of the diaphragm plate is covered with a rubber diaphragm, the diaphragm is covered with a filter cloth, and the side plate is the ordinary filter plate. Material from the thrust plate hole into each filter chamber, solid particles because of its particle size is greater than the pore diameter of filter medium (cloth) trapped in the filter chamber, the filtrate from filter plate at the bottom of the hole of produced liquid flow out. When the filter cake needs to be pressed dry, it can also be used to compress air or steam, which can be used to reduce the moisture content of the cake.

(1) filtering mode

The filtrate outflow is filtered and filtered.

A, light flow filtration: water nozzle is installed on the lower part of each filter plate and the filtrate is directly out of the water nozzle.

B. Dark flow filtration: a liquid channel hole is provided below each filter plate and the outlet of a number of filter plates is connected to an outlet

A pipe that is connected by a fluid hole below the thrust plate is expelled.

(2) washing method

When the filter cake needs to be washed, it has one-way washing and two-way washing, dark flow one-way washing and two-way washing.

Is A unidirectional washing, Ming flow, lotion from lotion into the hole in turn into the thrust plate, wear filter cloth and filter cake, from the hole filter plate, then perforated plate produced liquid water mouth closed, no orifice of produced liquid water nozzle is open.

B, Ming is bi-directional flow washing lotion from both sides of the thrust plate above the lotion into the hole has two times of washing, namely lotion from the side of washing first, then from the other side of the washing, wash the exports and imports are diagonal direction, so also called two-way cross washing.

C, the backflow one-way flow scrubber is the liquid of the lotion from the hydraulic feed hole of the thrust plate into the perforated plate, through the filter cloth and filter cake, from the perforated filter plate.

D, the undercurrent is two-way washing lotion from check two lotion into the hole on either side of the plate at the top of the washing twice, namely washing from the side of washing first, then on the other side of washing, the export of lotion is diagonal direction, so also called undercurrent two-way cross washing.

(3) filter cloth, filter cloth is a kind of main filter medium, the selection of filter cloth and use, has a decisive effect to filtering effect, choose according to the filter material when PH value, such factors as the solid particle size to choose the appropriate filter cloth filter material and aperture to ensure low cost and high filtration efficiency, when using, to ensure that the filter cloth level not discounted, aperture open.